Disable panorama server from cli

thanks, but the problem is that we don't see the GUI in the FW, the cli works correctly and this was from when it was uploaded to panorama

Hello Rodrigo:

Note: To remove all the Panorama-pushed configurations on the managed firewall, which includes configuration for other vsys, go to Device > Setup > Management on the managed firewall. Then, under Panorama Settings, select Disable Panorama Policy and Objects and Disable Device and Network Template .

All Panorama-pushed configurations can be removed from the CLI of the managed firewall.

The following CLI commands disable policy, objects, and template values pushed from Panorama:

> set system setting shared-policy disable

> set system setting template disable

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClqxCAC

_________________

Change Set to delete:

set deviceconfig system panorama
set deviceconfig system panorama local-panorama
set deviceconfig system panorama local-panorama panorama-server <value>
set deviceconfig system panorama local-panorama panorama-server-2 <value>

https://docs.paloaltonetworks.com/pan-os/9-1/pan-os-cli-quick-start/cli-changes/new-set-commands#:~:text=set%20deviceconfig%20system%20panorama%0Aset%20deviceconfig%20system%20panorama%20local%2Dpanorama%0Aset%20deviceconfig%20system%20panorama%20local%2Dpanorama%20panorama%2Dserver%20%3Cvalue%3E%0Aset%20deviceconfig%20system%20panorama%20local%2Dpanorama%20panorama%2Dserver%2D2%20%3Cvalue%3E